Drilling method of ceramic tile:
1. The following tools shall be prepared for drilling ceramic tiles: lithium electric hammer, glass drill bit, water and sealing glue.
2. Select the appropriate position on the perforated ceramic tile, and check whether there is hollowing in the ceramic tile at the same time, so as to avoid punching on the hollowing ceramic tile.
3. Before punching, paste sealing glue on the ceramic tile first, which is conducive to positioning the punching position and preventing slipping, resulting in cracking of the ceramic tile.
4. When drilling, remember to adjust the electric hammer to the flat drilling mode first, and then turn on the switch. The flat drilling mode rotates slowly during drilling and then drives the hole.
Precautions for drilling ceramic tile wall:
1. When drilling the whole ceramic tile, you need to add water while drilling, and you can only do it when the ceramic tile is cooled, which can prevent the drilling from heating and causing the cracking of the ceramic tile.
2. When drilling ceramic tiles for expansion bolt nails, the width of the drilling hole shall be selected according to the size of the bolt.
3. When drilling, the sealing glue must be pasted on the surface of the ceramic tile, because this can prevent the enamel on the surface of the ceramic tile from slipping the drill bit during drilling, causing the ceramic tile to crack or scratch the surface of the ceramic tile.
(Yueqing Jiesheng Tools Co., Ltd. Established in 1989, is a company specialized in manufacturing and trading hardware tools, covering a construction area of 10000 square meters. The company is located in Yueqing city in Furong, Zhejiang province. In 2003, with the approval of China Federation of Industry & Commerce, Furong Town won the title of “China Drill Bit (Construction Engineering) Industrial Base”. The company is nearby Shanghai and Ningbo ports, endowed with convenient transportation.)
Post time: May-14-2022